Toggle Nav
  • My Cart
  • VAT
Search
Advanced Search
  • Compare Products
Menu
Account
Settings
  • Sign In
  • Create an Account
Go back

TilePro Flex S1

Share
Login to earn Coins for sharing!
High performance, deformable, multi-purpose polymer modified cementitious tile adhesive with no vertical slip for non-vitrified, vitrified, glass mosaic, porcelain and non-moisture sensitive natural stones tiles
In stock
Only %1 left
SKU
TPFS1
Be the first to review this product

Quantity Calculator

m²
Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 2.16 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 3.24 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 4.32 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 5.40 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 6.48 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 7.56 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 8.64 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 9.72 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 10.80 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 11.88 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 12.96 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 14.04 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 15.12 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
TilePro Flex S1 20 16.20 kg/m2
TilePro Flex S1 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

main product photo
Where To Buy
DATA RESULT
Appearance Fine powder
Mix Density 1,400 kg/ liter
Water Powder Ratio 27 to 29%
Working Time (Pot Life) 4 - 6 hours
Adjustability Time approx. 30 mins
Wall Grouting after 4-8 hours depending on absorbency
Floor Grouting after 24 hours
Set to light foot traffic after 24 hours
Ready for use after 14 days
Application temperature range +5º C to +45º C
Service Temperature in use -10º C to +90º C
Resistance to alkalis Excellent
Resistance to solvents Excellent
Resistance to ageing Excellent
VOC content 0 g/ liter

 

 

Test according to EN 12004-2/ ISO 13007:

DATA STANDARD REQUIREMENT C2 TE RESULT
 Flexural strength @ 28 days freeze-thaw cycles after dry storage ISO 13007-4≥ 1 N/mm² Complies
 Compressive strength @ 28 days freeze-thaw cycles after dry storage ISO 13007-4≥ 1 N/mm² Complies
Tensile adhesion strength @ 28 days initial adhesion strength adhesion after heating: adhesion after water immersion: adhesion after freeze thaw cycles: BS EN 12004-2 ISO 13007≥ 1 N/mm² Complies
Slip resistance @ 28 days BS EN 12004-2≤ 0.5 mm CompliesNil
Sheer Strength @ 28 days BS EN 12004-2≥ 1 N/mm²  Complies

 

 

Test according to ANSI 118.4:

DATA STANDARD REQUIREMENT RESULT
Tensile strength initial adhesion strength after 28 days open time @ 20 minutes: ≥ 0.5 N/mm²(75 psi) Complies
Slip resistance @ 28 days ≤ 0.5 mm Complies
Sheer Strength @ 28 days ≥ 1.38 N/mm²(200 psi) Complies

Description

TilePro Flex S1 is a high-performance polymer-modified cement- based, tile and stone adhesive for a wide range of applications. Especially suitable for large-size porcelain tiles and non-moisture sensitive natural stones tiles

TilePro Flex S1 is a blend of Portland cement, graded sand reinforced with high quality organic polymer, synthetic resins and special additives. Mixed with water, it becomes an easily trowellable mortar with good bonding strength, low slump and high grab so that it can be applied vertically without sagging, even holding heavy tiles

Additional Information

Applicable Standards/ Compliance: Packaging: Colours: Coverage/ Yield:
Tested according to American ANSI A118.4 International ISO 13007-1 & EN 12004, classified as C2TE S1 - improved (2) slip-resistant (T) cementitious (C) adhesive with extended open time (E) deformable (S1) of class 20 kg bag Grey & White
  • Water to Powder Mix Ratio: 27 to 29%
  • Yield: 18.42 liters of mortar/ 20 kg bag
  • Coverage: 6.14 m² per bag @ 3mm thickness.
    * This coverage is theoretical & depends upon the surface profile of the substrate & the wastage.* Yield = (Bag weight + water addition)/ Mix density

Typical Applications

  • For Indoor and Outdoor use
  • For Walls, Floors and Ceilings
  • For Dry Wet areas (example: bathrooms, kitchen, toilets, balconies)
  • For swimming pools, pool surrounds, wet rooms and cold stores.
  • For installing non-vitrified, vitrified & fully vitrified tiles, ceramic, porcelain mosaic, glass mosaic, glass tiles, brick tiles, terracotta, artificial reconstituted stones & non-staining natural stones.
  • For Tile-on-Tile after BondPro Grip Primer
  • For installing tile directly on the bonded liquid waterproofing membranes such as AquaShieldPro CW 31 or AquaShieldPro CW 21 in swimming pool, terraces and wet areas or AquaShieldPro SBR70 or AquaShieldPro CW 1K in wet areas.
  • On crack isolating fabric, cement screeds, ground anhydrite and/or gypsum based floated screeds, precast concrete elements, aerated concrete, heated screeds, plasterboards, gypsum fibre boards, dry screeds, insulation boards, plaster slabs, plaster, masonry, old ceramic tiles, cork rubber mats.
  • For installing tiles onto impact sound insulation mats
  • Used in conjunction with TilePro Grout EP, the system is suitable for use where chemical resistance or a high standard of hygienic quality is essential.
  • For Paper-faced or mesh-backed ceramic mosaics & all types of ceramic tiles (quarry tiles, single fired and klinker tiles, etc.) absorbent single-fired or double-fired ceramic tiles

Benefits

  • Low VOC emission designed tile adhesive
  • Flexible – polymer modified, compensates changes in temperature and elongations of the substrate
  • Good extended open and adjustability time, facilitating installation.
  • Waterproof: immersion will not affect adhesion
  • Non-slip, perfect for walls
  • High adhesive bond strength
  • Easy workability.
  • No shrinkage.
  • No curing required.
  • No need for hacking
  • Medium-Bed, usable to a thickness up to 15 mm in case of uneven substrates
Technical Data Sheet Download
Material Safety DataSheet Download
Test Reports Download
Substrate Preparation

The substrate must be well cured, mechanically and dimensionally stable, strong, clean, dry and free from flaking parts, laitance, grease, oil, paint, wax, corrosion deposits, dust, loose materials, etc. It should be ensured that tiles are dry, and free of contaminants that could impair adhesion. Concrete, screeds, renders, and blockwork should be cured sufficiently that all shrinkage movement has occurred

Minimum age of the substrate (In mild weather):

  • Renders must have cured at least 1 week for each centimeter of thickness
  • FloorPro Rapid Screed (rapid setting cementitious screed) must have cured at least 3 days
  • FloorPro Easy Screed (normal cementitious screed) must have cured at least 28 days

Note: The screed drying time is subject to the screed thickness and site conditions

Product Preparation

Add 5.4 liters of clean water in the mixing bucket. Add full bag of TilePro Flex S1 powder slowly and mix continuously for approximately 3-5 minutes until a smooth, creamy and lump free consistency is achieved. Add water, if necessary, within the limits given (max 5.8 liters / bag), until the required consistency is achieved. Mix for a further 1-2 minutes. The amount of water required will be affected by ambient temperature and relative humidity

Product Application

TilePro Flex S1 is applied with a notched trowel onto the substrate. To obtain good adhesion to the substrate the following system is recommended:  first apply a thin coat of TilePro Flex S1 using the smooth side of the trowel and immediately afterwards apply the desired thickness using the toothed side of the trowel on to a smooth surface (trowel @ 45°)

Others

Cleaning:

Tools, equipment and mixers with clean water immediately after use (before hardening). Cured material can only be    removed by mechanical means. Similarly, joints must be raked out in readiness for grouting

Finishing:

Remove excess adhesive with a damp cloth before material has set.

Protection:

Protect floors from foot traffic for at least 72 hours after installation. Stepping boards may be used after 24 hours when occasional stepping on the floor is unavoidable.

Recommendations:

  • Try to avoid application during the hottest times of the day, and in direct sunlight.
  • In hot weather use cold water to bring the mixed material temperature to <30°C.
  • In cold weather use warm water to raise the mixed material temperature to >10°C.
  • Do not add water or fresh mortar to material which has begun to set. Just remix again for 1-2 minutes.
  • Do not proceed with the application when rainfall is imminent unless in a sheltered or protected situation.
  • Only full bags of the product shall be mixed by
  • mechanical means.
  • The product should not be exposed to moving water during application or prior to initial set.
  • Mix only sufficient material that can be applied using available labour and equipment to ensure a continuous and uninterrupted application.
  • Gypsum plaster and plaster boards and surfaces must be primed with BondPro Penetrating Primer as per the datasheet.
  • Do not use TilePro Flex S1
  • on wood and wooden composites
  • on gypsum board or lightweight concrete walls without the correct preparation and treatment
  • on metal, rubber, PVC and linoleum surfaces

- large format tiles

- on pre-cast concrete or surfaces subject to excessive movements

- in cases where the surface needs to be set to light

traffic quickly.

Write Your Own Review
You're reviewing:TilePro Flex S1
Your Rating