Toggle Nav
  • My Cart
  • VAT
Search
Advanced Search
  • Compare Products
Menu
Account
Settings
  • Sign In
  • Create an Account
Go back

PlasterPro Rushbond

Share
Login to earn Coins for sharing!
Premium quality, Ready-mixed rush coat for blocks and concrete
In stock
Only %1 left
SKU
PPRB
Be the first to review this product

Quantity Calculator

m²
Product Pack Size Coverage Unit Total Requirement No of units Required
PlasterPro Rushbond 50 3.9 kg/m2
PlasterPro Rushbond 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

Product Pack Size Coverage Unit Total Requirement No of units Required
PlasterPro Rushbond 50 5.2 kg/m2
PlasterPro Rushbond 0.00
Price/Sqm

*This Coverage Is Theoretical & Depends Upon The Surface Profile Of The Substrate & The Wastage.
*Coverage Rates Given Refer To This Project Only.
*Wastage Of Material And Preparation Of Surface Not Included.

main product photo
Where To Buy
DATA RESULT
Appearance Grey powder
Mix Density >1,725 kg/m³
Water Powder Ratio 19 to 20%
Recommended thickness 3 mm
Max. time for application 45 minutes @25° C
Working Time (Pot Life) 45 minutes
Compressive Strength(ASTM C109 /109M- 16a) >  7 N/mm² (7 days)>  9 N/mm² (28 days)
Application temperature range +5º C to +35º C
Chloride Content Nil
VOC content 0 g/ liter

 

Note:

* All values given are subject to 5-10% tolerance

* At +23°C and 50% relative humidity. Higher temperatures reduce, lower temperatures increase the times given.

* Properties listed above are only based on controlled laboratory samples and tests: Results may differ based upon statistical variations depending upon mixing methods and equipment, temperature, application methods, test methods, actual site conditions and curing conditions.

®=Registered trademark of the North Group.

Description

PlasterPro Rushbond is a single component high quality Portland cement, carefully selected processed natural mineral aggregates, excellent binding powder polymer and very special chemical additives for performance enhancements and is used as a mechanical key coat on concrete substrates before rendering. It improves adhesion of plaster / cement render, applied on masonry block and concrete.

It can be applied using a Tyrolean box/spray hopper/powder pattern spray gun.

Additional Information

Applicable Standards/ Compliance: Packaging: Colours: Coverage/ Yield:
ASTM C387, C150, C926, C897 BS 5262, 4551, 5492, 1015 50 kg bag.  Light Grey Water to Powder Ratio: 19 to 20% Yield: approx. 34.50 liters of mortar/ 50 kg bag Coverage: 3 to 4 kg/ m² per bag @ 3mm thickness.
* This coverage is theoretical & depends upon the surface profile of the substrate & the wastage.* Yield = (Bag weight + water addition)/ Mix density

Typical Applications

PlasterPro Rushbond is used for providing a mechanical key on AAC (Autoclaved Aerated Concrete) blocks, clay, bricks or concrete substrate, dense concretes containing micro silica, GGBS  (Ground Granulated Blast-furnace Slag) and fly ash, prior to plastering for subsequent layers of plaster and renders. The product can be applied on any sound concrete element in the building

Benefits

  • Pre-mixed ready to use to avoid site mixing errors.
  • Ideal for internal and external application.
  • Suitable for a wide range of concrete and masonry substrates.
  • Quality controlled factory blended to provide consistent finish.
  • Aggregate grading increases workability and provides for optimum quality finish.
  • Excellent strength and adhesion.
  • Suitable for hot weather.
  • Excellent workability
Technical Data Sheet Download
Test Reports Download
Substrate Preparation

The substrate must be laitance free, clean, rough and free from dirt, oil, grease or other contaminants and loose or friable particles. Absorbent surfaces should be saturated thoroughly with clean water. As such, spray/ saturate surface with water before applying the PlasterPro Rushbond coat to minimize absorption. In other words, the substrate must be in Saturated Surface Dry (SSD) condition prior to application of product.

Delaminated, weak, damaged and deteriorated concrete where necessary should be removed to sound base by suitable means. For any repairs of the substrate, materials from RepairPro range should be used, and applied at least 24 hours before. Consult NORTH Technical Department for further advice

Product Preparation
  • Add PlasterPro Block Grip bag of 50 kg into a container of 10 litre of clean water.
  • Mix until a uniform lump free consistency mix achieved.
  • Leave the mix to stand for 5 minutes and remix before uses, without adding any extra quantity of water.
  • Use low speed mechanical mixer (200-300 rpm) with a suitable mixing paddle to achieve desired consistency.
  • Allow product to set for 5 minutes and remix before use, without adding any extra quantity of water.
  • The mixture remains workable for one hour after mixing at 25°C.
Product Application

PlasterPro Rushbond BL Coat is best applied on to the prepared substrate using a tyrolean box or suitable spraying equipment. Apply on entire prepared area and allow time for the material to stiffen. Ensure that the applied material covers the entire surface area by doing uniform application. A rough texture is to be obtained to provide a mechanical key for the subsequent coat of plaster.

PlasterPro Rushbond BL should be applied in a total thickness of 2-3mm, ensure that wet mix covers the entire surface area. Cure the applied coat with water for minimum 3 days

Others
Write Your Own Review
You're reviewing:PlasterPro Rushbond
Your Rating